How to Use QBoat Sunny to build WiFi Applications

How to Use QBoat Sunny to build WiFi Applications

In this tutorial, we will use transfer information from DHT11 (connected to LinkIt 7697) to QBoat Sunny via HTTP. Then, the QIoT Suite Application will output the temperature every 30 seconds, and humidity every 60 seconds. What You’ll Need: QBoat Sunny Files used: Download Here MediaTek LinkIt 7697 DHT11 Temperature and Humidity Sensor AP Wireless Router Create and Setup QIoT Application Open QIoT Suite > IoT Applications > Import > select test.json Connect LinkIt 7697 Connect the DHT11 to LinkIt 7697. GND to GND VCC to 3V3 Signal to P3 Download and Install the Arduino IDE here Open dht11-wifi.ino in Arduino…

Read More

How to Control QBoat Sunny via Voice Control

How to Control QBoat Sunny via Voice Control

In this tutorial, we will be using voice control to call upon the data generated by DHT11, with the help of QIoT Suite, an Ubuntu Container and Dialogflow (formerly api.ai). What You’ll Need: QBoat Sunny Microphone Speakers MediaTek LinkIt 7697 DHT11 Temperature and Humidity Sensor Container Station Files used: Download Here Create Container and Install Dependencies Create the Ubuntu container. Open Container Station > Create > Search for Ubuntu and Install/Create the LXCcontainer. Install the dependencies. SSH to the NAS. Instructions can be found here. Enter the following lines: $ lxc-container -n <container name> $ sudo apt update $ sudo apt install…

Read More

How to Use Chatbot with QBoat Sunny

How to Use Chatbot with QBoat Sunny

In this tutorial, we will be using Chatfuel to control a light bulb by interacting with our chatbot in Facebook Messenger. What You’ll Need: QBoat Sunny QIoT Suite Lite MediaTek LinkIt 7697 Relay and Power Plug (Reference: Web Controlled Socket by Arduino by Laisan) AP Wireless Router Lightbulb Facebook Account Files used: Download Here Create and Setup QIoT Open QIoT Suite > IoT Applications > Import > select chatbot-light.json Open the uploaded QIoT Application. Navigate to the Rule tab. Create and Setup our Chatbot via Chatfuel Register or sign-in to Chatfuel using your Facebook account. Click Create from Template. Select Blank Bot. Click Connect. Select the page…

Read More

How to Connect a Z-Wave Device to QIoT Container Station / OpenHAB Configurations

How to Connect a Z-Wave Device to QIoT Container Station / OpenHAB Configurations

Go into Inclusion-mode on your Z-Stick and add your desired Z-Wave device. We will be using the FGPB-101 Fibaro Button in this tutorial. Instructions for this step can be found in the Z-Stick manual. Plug your Z-Stick USB into your NAS. Connect to your NAS via SSH (instructions here). Enter insmod /usr/local/modules/cdc-acm.ko if cdc-acm.ko is already installed, you will see this message: Look for your Z-Stick device path by entering ls -al /dev/ttyACM* In our case, we have found /dev/ttyACM0 Change the permissions to allow read and write for everyone by entering chmod…

Read More

How to install HASS.IO in QNAP NAS?

How to install HASS.IO in QNAP NAS?

How to install HASS.IO in QNAP NAS? In this tutorial you will learn how to easily install HASS.IO in QNAP NAS. HASS. IO not only including Home Assistant software but increasing Plugin download installation, management web interface integrated into Home Assistant, etc. Compare to Home Assistant, HASS.IO increase more convenient function for user to use.   HASS.IO will be managed by using Docker system. The below tutorial will teach you how to use Docker in LXC to install HASS.IO. (You may refer to “How to install Docker (x86) in QNAP…

Read More

How to install Docker (x86) in QNAP NAS LXC container?

How to install Docker (x86) in QNAP NAS LXC container?

How to install Docker (x86) in QNAP NAS LXC container? In this tutorial you will learn how to install Docker in QNAP NAS LXC container (Using x86 NAS model as a sample)   Installation Go to QNAP APP Center to install Container Station and set up your environment Using SSH into NAS and go to NAS Host to edit “/usr/local/container-station/lxc/share/lxc/config/common.conf” Modify string “lxc.mount.auto = cgroup:mixed proc:mixed sys:mixed” into “lxc.mount.auto = proc:mixed sys:mixed” Note: 1. Once you have upgraded Container Station then you may need to follow this step again. 2….

Read More

How to access QIoT Suite Lite debug log?

How to access QIoT Suite Lite debug log?

How to access QIoT Suite Lite debug log? In this FAQ, we will introduce you how to access QIoT Suite Lite debug log when some error happened. You can download this debug log and transfer it to QNAP technical service engineer for solving your problem.   If you can log in to QIoT Suite Lite successfully then you may follow the steps to download log: In QIoT Suite Lite page > click> click “About” Click “Download debug log“ Transfer “qiotdebug.tar.gz” file to QNAP technical service engineer    If you can not…

Read More

How to install Seeed Studio Wio Link Server in QNAP NAS?

How to install Seeed Studio Wio Link Server in QNAP NAS?

How to install Seeed Studio Wio Link Server in QNAP NAS? In this tutorial, you will learn how to install Seeed Studio Wio Link Server in QNAP NAS. Currently, only support x86 & ARMv7 models to use this function. According to different NAS models, there are two different establishments: Install Wio Link Server in Container Station x86 ARMv7 Wio Link Server IP setting Wio Link APP setting   1. Install Wio Link Server in Container Station Ensure you already installed QNAP Container Station before starting this function. x86 NAS model…

Read More

Object detection demo by using QNAP AWS Greengrass, QIoT Suite Lite & QuAI

Object detection demo by using QNAP AWS Greengrass, QIoT Suite Lite & QuAI

Object detection demo by using QNAP AWS Greengrass, QIoT Suite Lite & QuAI In this tutorial, you will learn how to use QNAP AWS Greengrass, QIoT Suite Lite & QuAI to do object detection doem. Prepare: AWS Account Raspberry Pi USB webcam There are two Scenario: Scenario 1 Camera –> AWS Greengrass IoT device –> AWS Greengrass Core –> QIoT Suite Lite –> QuAI –> AWS Greengrass Core Lambda –> AWS Cloud –> AWS S3 bucket Step 1. Prepare AWS Greengrass Core Go to APP Center > Install AWS Greengrass Setup…

Read More

How to install other modules in QNAP QIoT Suite Lite NodeRED?

How to install other modules in QNAP QIoT Suite Lite NodeRED?

How to install other modules in QNAP QIoT Suite Lite NodeRED? In this tutorial, you will learn how to install other modules in QNAP QIoT Suite Lite NodeRED: Using UI to install NodeRED(npm) (Official Plugin) Manually to install NodeRED (Official Plugin) Manually to install Zip.file (Non-official Plugin) Note: If UI do not display the node after installing then please install by manually.   1. Using UI to install NodeRED(npm) (Official Plugin) Go to QIoT Suite Lite >  Choose IoT Application > Go to Rule Click Menu > Choose Manage palette…

Read More