Connect Grove Indoor Environment Kit for Intel Edison to QNAP NAS via QIoT Suite Lite

Connect Grove Indoor Environment Kit for Intel Edison to QNAP NAS via QIoT Suite Lite

This tutorial covers setting up a Grove Indoor Environment Kit followed by connecting the devices to QIoT Suite Lite. Setup your Grove Indoor Environment Kit for Intel Edison 1.1 What you will need An Intel Edison board Grove Indoor Environment Kit for Intel Edison A Micro B to Type A USB cable A power supply with at least 7-15V DC and 1500mA A Wi-fi access pointThe Intel Edison and NAS must be under the same LAN. 1.2 Set up Intel Edison If you have not set up your Intel Edison,…

Read More

How to connect QIoT Suite Lite and IFTTT to send and show data on mobile devices?

How to connect QIoT Suite Lite and IFTTT to send and show data on mobile devices?

An IFTTT account is required to use this feature. Step 1: Establish a “maker webhook” connection: Go to log in to the IFTTT website and go to : https://ifttt.com/maker_webhooks Click “Connect “. Go to https://ifttt.com/maker_webhooks , and click “Documentation “. Your key will be displayed. Take a note of this key as it will be needed later. Step 2: Establish Applets: In the My Applets window, choose “New Applet “. Click “+ this “. Search for “webhooks “, and click the “Webhooks” result. Choose “Receive a web request “, set up your Event Name, and click…

Read More

How to show DHT11 data on QIoT Dashboard?

How to show DHT11 data on QIoT Dashboard?

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. This tutorial will show how to display – DHT11 data on QIoT Dashboard (using a Seeeduino with W5500 Ethernet Shield). “IoT Applications” → “Add IoT applications” In “Create a New IoT application”: Enter a name for your IoT Application. The Rule name and Dashboard name will be automatically generated based on the IoT Application Name. Click “Create”. “Add Thing”: Enter a name for the Thing (in this sample: “Thingname”). “Custom” in “Thing Category”. Click “Add”. Click the “Thing…

Read More

How to Integrate Power BI with QIoT Suite Lite?

How to Integrate Power BI with QIoT Suite Lite?

1.1 Get your first Power BI account Sign up for a free PowerBI account at https://powerbi.microsoft.com/en-us/ After registering, you will see the following page: 1.2 Setup your streaming dataset API Go to “Datasets -> Streaming datasets” on the left menu, and click “+ Add streaming dataset” in the top-right corner. Select “API” as your source of data, and click “Next”. Define your values from stream, and you will get a JSON result in the textbox. We will use this JSON code to push data to the IoT application. Click “Create” to…

Read More

Connect Raspberry Pi to QNAP NAS via QIoT Suite Lite

Connect Raspberry Pi to QNAP NAS via QIoT Suite Lite

Get started with Raspberry Pi (Nodejs) In this tutorial, you will learn the basics of working with Raspberry Pi (that runs the Debian-based Raspbian). You will then learn how to connect your devices to QNAP NAS using QIoT Suite Lite. Please ensure your Raspberry Pi and NAS are on the same LAN. 1. Connect Raspberry Pi to QNAP NAS Please configure your Raspberry Pi device with an operating system, set up your development environment, and deploy an application to Raspberry Pi. 1.1 What will you need Raspberry Pi SD card…

Read More

How to use an ESP8266 to connect to QNAP QIoT Suite Lite?

How to use an ESP8266 to connect to QNAP QIoT Suite Lite?

  In this tutorial, you will learn how to use MQTT to transmit and receive data to QIoT Suite Lite using an ESP8266. As the ESP8266 has different firmware, specifications and instructions, there are two common methods: ESP826 useing Arduino Core ESP826 useing AT Command combined with Arduino   Ready task (Using Arduino IDE to install the Library and establish IoT Application) 1.  In this example, we use MQTT (for more information, visit https://pubsubclient.knolleary.net/ ). 2. Add a new IoT Application (Refer to “How to show DHT11 data on QIoT…

Read More

Monitor your home appliances via chatbot on QBoat Sunny

Monitor your home appliances via chatbot on QBoat Sunny

Requirements QBoat Sunny QIoT Suite Lite QUSBCam2 MediaTek LinkIt 7697 Relay and power plug (Refer to this article: Web Controlled Socket by Arduino written by LaiSan.) Follow the instructions to install the relay and power plug. USB webcam AP Wireless Router Lamp A Facebook account   Diagram Principles   The MediaTek LinkIt 7697 is the HTTP Wi-Fi controller. You can decide to turn the relay on or off after receiving an HTTP request. AC power on as replay on, AC off when the relay is off.   The MediaTek LinkIt…

Read More

How to use QBoat Sunny & QIoT Suite Lite to build Wi-Fi applications

How to use QBoat Sunny & QIoT Suite Lite to build Wi-Fi applications

 Abstract QBoat Sunny provides similar functions to a standard QNAP NAS, and provides outstanding performance for Edge Computing. In this tutorial, we will use Wi-Fi as an application scenario:   Diagram MediaTek LinkIt 7697 development board   Use HTTP to request the temperature and humidity readings from the DHT11.   Pin connections   DHT11 MediaTek LinkIt 7697 + 5V – GND DO P3   The code is as follows.   Please note that you can test the code by connecting a wireless AP router by LWiFi. If successful, then the…

Read More

How to use historical data access API on QNAP QIoT Suite Lite

How to use historical data access API on QNAP QIoT Suite Lite

How to use historical data access API on QNAP QIoT Suite Lite   In this tutorial, you will learn how to use historical data access API on QNAP QIoT Suite Lite. Using the historical data access API, the limitation is that you have to create a thing on QIoT and confirm the data input type is numeric (int, float), and then it can output in count, sum, vmin, vmax, and vavg type normally.   And if your data received is from Node-RED (e.g., TCP, UDP, HTTP, and MQTT node), and…

Read More

How to use Mass Deployment on QNAP QIoT Suite Lite

How to use Mass Deployment on QNAP QIoT Suite Lite

How to use Mass Deployment on QNAP QIoT Suite Lite Mass deployment can help you upload infromation & resourceinfo.json, and commands via SSH to multiple devices ( Only for devices support SSH with port number 22 )   Setting Device connection  Create the Thing and setup the resource   Choose the Thing you want to set up and then click the “Setup” button   Enter the device connection information:   Hostname : <IP Address> User Name : <User Name> Password : <Password>   You can test the entered information is…

Read More