QNAP at Automation Taipei, Showcasing QVR Face- Personnel Management with Face Recognition Technology Implemented in a Smart Factory Setting

QNAP at Automation Taipei, Showcasing QVR Face- Personnel Management with Face Recognition Technology Implemented in a Smart Factory Setting

QNAP, Motorcon Inc. and IEI Integration Corp. were joined together at the Taipei International Automation Exhibition 2019, held from 8/21-8/24. Their booth, which is located at booth N1308 on the 4th floor of TaiNEX 1, where they will be showcasing industrial automation, AI and IoT related solutions.

Read More

How to Use QBoat Sunny to build WiFi Applications

How to Use QBoat Sunny to build WiFi Applications

In this tutorial, we will use transfer information from DHT11 (connected to LinkIt 7697) to QBoat Sunny via HTTP. Then, the QIoT Suite Application will output the temperature every 30 seconds, and humidity every 60 seconds. What You’ll Need: QBoat Sunny Files used: Download Here MediaTek LinkIt 7697 DHT11 Temperature and Humidity Sensor AP Wireless Router Create and Setup QIoT Application Open QIoT Suite > IoT Applications > Import > select test.json Connect LinkIt 7697 Connect the DHT11 to LinkIt 7697. GND to GND VCC to 3V3 Signal to P3 Download and Install the Arduino IDE here Open dht11-wifi.ino in Arduino…

Read More

How to Control QBoat Sunny via Voice Control

How to Control QBoat Sunny via Voice Control

In this tutorial, we will be using voice control to call upon the data generated by DHT11, with the help of QIoT Suite, an Ubuntu Container and Dialogflow (formerly api.ai). What You’ll Need: QBoat Sunny Microphone Speakers MediaTek LinkIt 7697 DHT11 Temperature and Humidity Sensor Container Station Files used: Download Here Create Container and Install Dependencies Create the Ubuntu container. Open Container Station > Create > Search for Ubuntu and Install/Create the LXCcontainer. Install the dependencies. SSH to the NAS. Instructions can be found here. Enter the following lines: $ lxc-container -n <container name> $ sudo apt update $ sudo apt install…

Read More

How to Use Chatbot with QBoat Sunny

How to Use Chatbot with QBoat Sunny

In this tutorial, we will be using Chatfuel to control a light bulb by interacting with our chatbot in Facebook Messenger. What You’ll Need: QBoat Sunny QIoT Suite Lite MediaTek LinkIt 7697 Relay and Power Plug (Reference: Web Controlled Socket by Arduino by Laisan) AP Wireless Router Lightbulb Facebook Account Files used: Download Here Create and Setup QIoT Open QIoT Suite > IoT Applications > Import > select chatbot-light.json Open the uploaded QIoT Application. Navigate to the Rule tab. Create and Setup our Chatbot via Chatfuel Register or sign-in to Chatfuel using your Facebook account. Click Create from Template. Select Blank Bot. Click Connect. Select the page…

Read More

How to Connect a Z-Wave Device to QIoT Container Station / OpenHAB Configurations

How to Connect a Z-Wave Device to QIoT Container Station / OpenHAB Configurations

Go into Inclusion-mode on your Z-Stick and add your desired Z-Wave device. We will be using the FGPB-101 Fibaro Button in this tutorial. Instructions for this step can be found in the Z-Stick manual. Plug your Z-Stick USB into your NAS. Connect to your NAS via SSH (instructions here). Enter insmod /usr/local/modules/cdc-acm.ko if cdc-acm.ko is already installed, you will see this message: Look for your Z-Stick device path by entering ls -al /dev/ttyACM* In our case, we have found /dev/ttyACM0 Change the permissions to allow read and write for everyone by entering chmod…

Read More

COMPUTEX 2019: QNAP to Showcase Backup Solution with Deduplication, AI-powered Smart Applications, Refreshed Network Appliances, and More

COMPUTEX 2019: QNAP to Showcase Backup Solution with Deduplication, AI-powered Smart Applications, Refreshed Network Appliances, and More

Taipei, Taiwan, May 27, 2019 – QNAP® Systems, Inc. (QNAP), a leading computing, networking and storage solution innovator, will join COMPUTEX TAIPEI 2019 (Nangang Exhibition Center, Hall 1, Booth No. J0830) to demonstrate the broadest lineup of solutions and products, including the efficient backup solution with built-in deduplication, AI-powered smart applications in image recognition, innovative network appliances, enterprise-class flash-optimized solutions, and Industrial IoT solutions. Visitors can also witness the debut showcase of the Drive Analyzer, a pre-launch AI-enhanced solution from QNAP and ULINK Technology (an industry leader in drive testing technologies) for…

Read More

How to use the OpenVINO inference engine in QNAP AWS Greengrass?

How to use the OpenVINO inference engine in QNAP AWS Greengrass?

How to use the OpenVINO inference engine in QNAP AWS Greengrass? In this tutorial you will learn how to use OpenVINO for perform Inference. Please note: AWS Greengrass 1.1 (or later) is required. You must be using an Intel-based NAS. Step 1: Set up Lambda functions for AWS IoT Greengrass Download the sample Lambda function from zip Refer to the following document for set up: Create and Package a Lambda Function ( Step 5 – 9) (Note: Lambda > Functions > Your Function > Function code > Handler need to…

Read More

How to import QTS administrator group users to QIoT Suite Lite?

How to import QTS administrator group users to QIoT Suite Lite?

How to import QTS administrator group users to QIoT Suite Lite? For using this function, you should upgrade your QIoT Suite Lite to v1.2.1 and above. Previously, QIoT Suite Lite only has an admin user. In this tutorial you will learn how to add the QTS administrator group users to QIoT Suite Lite and also to be an admin user in QIoT Suite Lite. (Note: Only support for QTS administrators group users to use this function, QTS other users are not unable to use.) Add QTS administrator to QIoT Suite…

Read More