How to Control QBoat Sunny via Voice Control

How to Control QBoat Sunny via Voice Control

In this tutorial, we will be using voice control to call upon the data generated by DHT11, with the help of QIoT Suite, an Ubuntu Container and Dialogflow (formerly api.ai). What You’ll Need: QBoat Sunny Microphone Speakers MediaTek LinkIt 7697 DHT11 Temperature and Humidity Sensor Container Station Files used: Download Here Create Container and Install Dependencies Create the Ubuntu container. Open Container Station > Create > Search for Ubuntu and Install/Create the LXCcontainer. Install the dependencies. SSH to the NAS. Instructions can be found here. Enter the following lines: $ lxc-container -n <container name> $ sudo apt update $ sudo apt install…

Read More

How to Connect a Z-Wave Device to QIoT Container Station / OpenHAB Configurations

How to Connect a Z-Wave Device to QIoT Container Station / OpenHAB Configurations

Go into Inclusion-mode on your Z-Stick and add your desired Z-Wave device. We will be using the FGPB-101 Fibaro Button in this tutorial. Instructions for this step can be found in the Z-Stick manual. Plug your Z-Stick USB into your NAS. Connect to your NAS via SSH (instructions here). Enter insmod /usr/local/modules/cdc-acm.ko if cdc-acm.ko is already installed, you will see this message: Look for your Z-Stick device path by entering ls -al /dev/ttyACM* In our case, we have found /dev/ttyACM0 Change the permissions to allow read and write for everyone by entering chmod…

Read More

How to use PyTorch with Container Station?

How to use PyTorch with Container Station?

How to use PyTorch with Container Station? 1. About PyTorch PyTorch is a Python-based scientific computing package for those who want a replacement for NumPy to use the power of GPUs, and a deep learning research platform that provides maximum flexibility and speed.   2. Installing PyTorch in Container Station 1. Assign GPUs to Container Station. a. Go to Control Panel > System > Hardware > Graphics Card. b. Under Resource Use, assign the GPUs to Container Station. c. Click Apply. 2. Open Container Station. 3. Use the correct image…

Read More

How to install HASS.IO in QNAP NAS?

How to install HASS.IO in QNAP NAS?

How to install HASS.IO in QNAP NAS? In this tutorial you will learn how to easily install HASS.IO in QNAP NAS. HASS. IO not only including Home Assistant software but increasing Plugin download installation, management web interface integrated into Home Assistant, etc. Compare to Home Assistant, HASS.IO increase more convenient function for user to use.   HASS.IO will be managed by using Docker system. The below tutorial will teach you how to use Docker in LXC to install HASS.IO. (You may refer to “How to install Docker (x86) in QNAP…

Read More

How to install Docker (x86) in QNAP NAS LXC container?

How to install Docker (x86) in QNAP NAS LXC container?

How to install Docker (x86) in QNAP NAS LXC container? In this tutorial you will learn how to install Docker in QNAP NAS LXC container (Using x86 NAS model as a sample)   Installation Go to QNAP APP Center to install Container Station and set up your environment Using SSH into NAS and go to NAS Host to edit “/usr/local/container-station/lxc/share/lxc/config/common.conf” Modify string “lxc.mount.auto = cgroup:mixed proc:mixed sys:mixed” into “lxc.mount.auto = proc:mixed sys:mixed” Note: 1. Once you have upgraded Container Station then you may need to follow this step again. 2….

Read More

How to install Seeed Studio Wio Link Server in QNAP NAS?

How to install Seeed Studio Wio Link Server in QNAP NAS?

How to install Seeed Studio Wio Link Server in QNAP NAS? In this tutorial, you will learn how to install Seeed Studio Wio Link Server in QNAP NAS. Currently, only support x86 & ARMv7 models to use this function. According to different NAS models, there are two different establishments: Install Wio Link Server in Container Station x86 ARMv7 Wio Link Server IP setting Wio Link APP setting   1. Install Wio Link Server in Container Station Ensure you already installed QNAP Container Station before starting this function. x86 NAS model…

Read More

How to install influxDb & Grafana in QNAP NAS?

How to install influxDb & Grafana in QNAP NAS?

How to install influxDb & Grafana in QNAP NAS? In this tutorial, you will learn how to use QIoT Suite Lite to display data with Grafana (Only support for x86 NAS models) influxDB container Install influxDB container Go to Container Station > Click “Create”  Search “influxdb”  Click “Install” > Click “Next” > Click “OK” Go to Network: In Port Forwarding, setting port 2003 & 8086 Go to Shared Folders: Save Database information to volume (Refer to below path: /var/lib/influxdb)  Click “Create”   Test the influxDB Go to Container Station >…

Read More

If error messages appear when installing AWS Greengrass (After updating QTS Lite from 4.3.3 to 4.3.4)

If error messages appear when installing AWS Greengrass (After updating QTS Lite from 4.3.3 to 4.3.4)

After upgrading QTS Lite from 4.3.3 to 4.3.4, attempting to install AWS Greengress may results in the following  error messages: To reslove this situation, you must remove and reinstall Container Station. To do so, follow these steps: 1. Go to “App Center” , find “Container Station“, click the downwards arrow next to “Open“, and select “Remove“.   2.  Reinstall the “Container Station” and then install “AWS Greengrass“.    

Read More

Integrating Home Assistant into your QNAP X86 System NAS

Integrating Home Assistant into your QNAP X86 System NAS

Integrating Home Assistant into your QNAP X86 System NAS Home Assistant is an open-source home automation platform running on Python 3 and Raspberry Pi. It is very easy and beneficial to combine QNAP X86 System NAS and Home Assistant. Notes : This tutorial only support on X86 system NAS, If you want to use it on ARM system, You should build docker image yourself, or search Home Assistant for ARM version on docker hub. Home Assistant can be easily installed on QNAP X86 System NAS by using Container Station app. For…

Read More

How to establish a MongoDB to connect with QNAP NAS via QIoT Suite Lite?

How to establish a MongoDB to connect with QNAP NAS via QIoT Suite Lite?

In this tutorial, you will learn how to establish a MongoDB to connect with QNAP NAS via QIoT Suite Lite. Step_1: Open Container Station and Set Up MongoDB Click “Container Station“. Click “Create Container“. Go to MongoDB and click “Install” (Click “MongoDB” for more information). Click “Create” This will install an empty container. You will need to install, remove, and then install a new MongoDB. Choose the container and remove it. Choose “Create Container“, and click “Install” to rebuild the MongoDB. In Command, enter “mongod –auth“. Click “Advanced Settings“. Go…

Read More