Connect QVR Pro to QNAP NAS via QIoT Suite Lite

qvr-pro

QVR QIoT

In this tutorial, you will learn how to connect QVR Pro to QNAP NAS via QIoT Suite Lite.

Step_1: Open QVR Pro and set the event

1

  • Click “” to create a new rule.

2

  • Enter a “Name” (for example: QIoT). (The “Description” is optional)
  • Click “Next“.

3

  • In “If –>The following event(s) occur“, click “Add“.

4

  • In “Add Event“:
    1. Name: Enter a preferred name (for example: “QIoT”).
    2. Type: Choose “Event URL“.

5

  • Enter an “Event source name” (for example: “temp”).
  • After entering the Event source name, a URL link will appear. Click “Copy to Clipboard“.
  • Click “OK“.

6

  • In “Then –>Perform the following action(s)“, click “Add“.

7

  • In “Add Action“:
    1. Name: Enter a preferred name (for example: “Action”).
    2. Type: Choose “Event Recording“.

8

  • In “Items“:
    1. Choose a camera ( If you have not set up a camera, refer to the Quick Setup Tutorial of QVR Pro Beta 0.8 for instructions)
    2. Click “OK“.

9

  • Click “Next“.

10

  • Click “Finish“.

11

Step_2: Setting QIoT Rule http request node

  • Open your IoT Application and click “Rule“.
  • In “function“, choose “switch” and “http request“, and then pull them into Flow 1.

12

  • Click “Switch“. (In here, set up the rules yourself).

13

  • Click “http request“:
    1. In “URL: Enter the URL link you have copied from QVR settings. (If QVR Pro and QIoT are used in the same NAS, the IP address must be changed to “10.0.7.1”)
  • Click “Done” and “Save“.

14

  • If QIoT received the rules settings it will notify QVR Pro to capture video. You will see the message “event [temp] detected“.

15

Related posts

Leave a Reply