How to solve the problem when using different port of QIoT Suite Lite v1.1.111

How to solve the problem when using different port of QIoT Suite Lite v1.1.111

In QIoT Suite Lite v1.1.111, it has avoided some well-known port (e.g., http-8080, https-443), but it will also confront some specific problems. Thus, we list some port for QIoT Suite Lite v1.1.111 used to avoid conflict. There are some ports been listed as follow to provide interior system to connect with outer devices (Port of Qgateway must be connect with outer connection, in this way, it can connect with devices) System Ports QIoT Suite Lite interface http(default:8080) and https(default:443) are according to port that QTS system set. Qgateway-QIoT Suite Lite Data Gateway System TCP-23000…

Read More

How to receive Sigfox data from QNAP QIoT Suite Lite

How to receive Sigfox data from QNAP QIoT Suite Lite

How to receive Sigfox data from QNAP QIoT Suite Lite   In this tutorial, you will learn how to receive Sigfox data from QNAP QIoT Suite Lite.   Setting QIoT Suite Lite Establish an IoT Application, Things, and Resource (please refer to the tutorial: How to show DHT11 data on QIoT Dashboard? )   To learn how to acquire for Resource HTTP and HTTPS, please refer to the followings two links: How to connect to QIoT Suite Lite using HTTP? How to connect to QIoT Suite Lite using HTTPS? If…

Read More

How to create voice control on QBoat Sunny

How to create voice control on QBoat Sunny

Abstract The Internet of Things is used in a wide range of applications, and in combination with smart home devices (such as electrical appliances, air quality detectors, thermometers, and air conditioners) can make your home smarter. In this tutorial we will show you how to use QBoat Sunny to enable voice control. Requirements QBoat Sunny Microphone Speakers 2x MediaTek LinkIt 7697 (One as a sensor, the other as a controller) DHT11 Temperature and humidity sensor Controllable outlet plug with relay DuPont cable Container Station with a Ubuntu LXC container (For…

Read More

Monitor your home appliances via chatbot on QBoat Sunny

Monitor your home appliances via chatbot on QBoat Sunny

Requirements QBoat Sunny QIoT Suite Lite QUSBCam2 MediaTek LinkIt 7697 Relay and power plug (Refer to this article: Web Controlled Socket by Arduino written by LaiSan.) Follow the instructions to install the relay and power plug. USB webcam AP Wireless Router Lamp A Facebook account   Diagram Principles   The MediaTek LinkIt 7697 is the HTTP Wi-Fi controller. You can decide to turn the relay on or off after receiving an HTTP request. AC power on as replay on, AC off when the relay is off.   The MediaTek LinkIt…

Read More

How to use QBoat Sunny & QIoT Suite Lite to build Wi-Fi applications

How to use QBoat Sunny & QIoT Suite Lite to build Wi-Fi applications

 Abstract QBoat Sunny provides similar functions to a standard QNAP NAS, and provides outstanding performance for Edge Computing. In this tutorial, we will use Wi-Fi as an application scenario:   Diagram MediaTek LinkIt 7697 development board   Use HTTP to request the temperature and humidity readings from the DHT11.   Pin connections   DHT11 MediaTek LinkIt 7697 + 5V – GND DO P3   The code is as follows.   Please note that you can test the code by connecting a wireless AP router by LWiFi. If successful, then the…

Read More

How to use historical data access API on QNAP QIoT Suite Lite

How to use historical data access API on QNAP QIoT Suite Lite

How to use historical data access API on QNAP QIoT Suite Lite   In this tutorial, you will learn how to use historical data access API on QNAP QIoT Suite Lite. Using the historical data access API, the limitation is that you have to create a thing on QIoT and confirm the data input type is numeric (int, float), and then it can output in count, sum, vmin, vmax, and vavg type normally.   And if your data received is from Node-RED (e.g., TCP, UDP, HTTP, and MQTT node), and…

Read More

How to use Mass Deployment on QNAP QIoT Suite Lite

How to use Mass Deployment on QNAP QIoT Suite Lite

How to use Mass Deployment on QNAP QIoT Suite Lite Mass deployment can help you upload infromation & resourceinfo.json, and commands via SSH to multiple devices ( Only for devices support SSH with port number 22 )   Setting Device connection  Create the Thing and setup the resource   Choose the Thing you want to set up and then click the “Setup” button   Enter the device connection information:   Hostname : <IP Address> User Name : <User Name> Password : <Password>   You can test the entered information is…

Read More

Integrating Home Assistant into your QNAP NAS

Integrating Home Assistant into your QNAP NAS

Integrating Home Assistant into your QNAP NAS Home Assistant is an open-source home automation platform running on Python 3 and Raspberry Pi. It is very easy and beneficial to combine QNAP NAS and Home Assistant.   Home Assistant can be easily installed on QNAP NAS by using Container Station app. For more information regarding Container Station, please check https://www.qnap.com/solution/container_station/en/index.php   Follow these steps to install Home Assistant: If you have not already installed Container Station on your NAS, you can find it in the NAS App Center. Open Container Station…

Read More

How to setup AWS Greengrass on QNAP NAS?

How to setup AWS Greengrass on QNAP NAS?

How to setup AWS Greengrass on QNAP NAS?                                                            In this tutorial, you will learn how to setup AWS Greengrass on QNAP NAS.    Install AWS Greengrass  Go to QTS App Center, find “AWS Greengrass” and click “install”   Configuring AWS Greengrass on AWS IoT cloud To configure AWS Greengrass on AWS IoT,  refer to : https://docs.aws.amazon.com/greengrass/latest/developerguide/gg-config.html    (* You do not need…

Read More

QNAP Unveils QBoat Sunny, a Single-Board IoT Mini Server for IoT Developers

QNAP Unveils QBoat Sunny, a Single-Board IoT Mini Server for IoT Developers

Taipei, Taiwan, November 14, 2017 – QNAP® Systems (QNAP®) today launched the all-new QBoat Sunny, a small and powerful single-board Internet of Things (IoT) mini server for IoT developers. QBoat Sunny can connect to versatile IoT development boards, devices and applications, and be used as a server for small-scale/private IoT applications, or a fog computing node/gateway in large-scale/public IoT environments. The high-performance QBoat Sunny can save significant bandwidth fees and cloud computing costs for developers, and integrate into various usage scenarios. QBoat Sunny provides unprecedented processing and storage performance with its Annapurna…

Read More